HP LaserJet M234sdwe Troubleshooting

The HP LaserJet M234sdwe printer is the best printer for the office, but even the best can face issues at times. We have listed a series of issues with the solutions to resolve them. Follow the instructions below and continue to use your printer without any issues.

hp deskjet plus 4140 driver install

HP LaserJet M234sdwe printer is offline – Error

If the printer indicates the alert that the printer is offline, complete these below checks to ensure that the printer issues are resolved

  1. Begin by restarting the printer. Remove the power supply and connect it back after a few minutes.
  2. Check for an active and stable connection. Restart the router and connect it back again.
  3. Check if the HP LaserJet M234sdwe is back online.
  4. On the device, check if the printer is available. Right-click on the device.
  5. Click on use printer. This should allow the printer to indicate that it is online.

HP LaserJet M234sdwe Printer driver unavailable

Follow the given list to remove the issue of the HP LaserJet M234sdwe printer indicating that it is unavailable

  1. Turn off the HP LaserJet M234sdwe printer for a few minutes and turn it back on.
  2. Do the same for the router. Turn off the router to restart it.
  3. Turn it back on after a few minutes. Now, you will have to connect the printer to the Wireless network.
  4. Click on the wireless button on the printer to redo the Network Setup menu.
  5. Complete the wireless network setup by following the instructions.
  6. Another option is to open the Service app and click on the Printer Spooler option.
  7. Change the startup option to automatic.
  8. With this, the printer should begin functioning properly again.

HP LaserJet M234sdwe Easy Start Installation Fails

  1. Make sure the printer and the wireless router are in the right condition. It should be working well with the latest updated software.
  2. Turn the HP printer on, open the wireless settings option to make sure the wireless signal is switched on.
  3. The light on the printer will begin to flash.
  4. Move over to the Ma device and select the network option to check the details of the wireless network.
  5. Continue with the installation but make sure VPNs are turned off.
  6. Carry on with the installation and the setup of the driver for the Mac device.

HP LaserJet M234sdwe Easy Start Installation Fails

  1. Make sure the printer and the wireless router are in the right condition. It should be working well with the latest updated software.
  2. Turn the HP printer on, open the wireless settings option to make sure the wireless signal is switched on.
  3. The light on the printer will begin to flash.
  4. Move over to the Ma device and select the network option to check the details of the wireless network.
  5. Continue with the installation but make sure VPNs are turned off.
  6. Carry on with the installation and the setup of the driver for the Mac device.

HP LaserJet M234sdwe Network Installation Error

  1. Begin the process by turning off the device and the HP LaserJet M234sdwe printer.
  2. Remove all the cables connected between the printer, the device, and the wireless router.
  3. After a few minutes, turn on the printer and device. Proceed to turn on the wifi router as well.
  4. Uninstall the driver software from the device. Disconnect the printer from the wireless connection as well.
  5. Now once all this is complete, begin the installation and the wireless network from the beginning.
  6. These changes should assist in the process of getting the printer to function again.

HP LaserJet M234sdwe printer not found during the driver setup

Windows 

  1. Power up the printer and the device and move over to the device. Open the HP Support page and download the fixed driver.
  2. Click on HP Print and Scan Doctor on the Windows device.
  3. Download and install the driver and follow the instructions.
  4. Check off details and suggestions given by the wizard and perform the checks.
  5. Apply the troubleshooting suggestions to remove the issues.
  6. If the issue continues to prevail, remove the driver and install it again.
  7. Follow the same installation process and continue.
  8. The printer should begin functioning effectively again.

Mac

  1. Power up the HP LaserJet M234sdwe printer and the Mac device.
  2. For a Mac device, download the HP Easy Start, and install it on the device.
  3. Open the downloaded file and select the HP East Start menu.
  4. Remove the driver from the device and install it again.
  5. Go to System Preference and click on Printers and Scanners.
  6. Look for the + icon and look for the available printers, HP LaserJet M234sdwe.
  7. Following this, select the printer and the connection will be established.

HP LaserJet M234sdwe Blue Screen Error

  1. Check the router; make sure the firmware is the updated version.
  2. Open the Command Prompt on the device.
  3. Key in the IP-config and proceed.
  4. Restart the router and the HP LaserJet M234sdwe printer as well.
  5. Turn it back on and move over to the printer and click the Restore Network Default.
  6. Proceed to connect to a wireless connection and the printer will be complete.

HP LaserJet M234sdwe router or network settings change

  1. Make sure the HP LaserJet M234sdwe printer and the wireless router are placed near each other.
  2. Turn on the HP LaserJet M234sdwe printer ad click on the Restore Network Defaults option.
  3. This can be found in the Restore Settings option.
  4. After it has been restored, complete the connection process.
  5. Key in the WiFi credentials for the available network and connect it.

If at any point you are unable to solve the issue and are still unable to use your printer, contact the experts to help rectify the issues for you in minutes.

Scroll to Top