HP Deskjet 2723e Troubleshooting

The HP Deskjet 2723e printer can face issues at some point but the key with the quality of the printer is to rectify the issue. A list of common issues has been added below to rectify the problems. Identify the issue with the HP Deskjet 2723e printer and complete the process. Some of the common issues the HP Deskjet 2723e printer faces are

  • Printer not found during the driver setup
  • The printer is not responding
  • Driver unavailable error
  • HP Easy Start Software Installation Fail

HP Deskjet 2723e printer not found during driver setup

Windows

  • Power up the HP Deskjet 2723e printer and the Windows device.
  • Open the HP Support website to download a driver to rectify the issues.
  • Download the HP Print and Scan Doctor for the Windows device.
  • Install the driver and open it to begin the analysis.
  • The HP Print and Scan Doctor to run the analysis of the printer.
  • The driver will locate and identify the issue with the printer.
  • Follow the instructions given by the HP Deskjet 2723e Print Doctor.
  • One of the changes that will need to be made is updating the driver.
  • Reinstalling the HP Deskjet 2723e driver to remove any issues.
  • The final step would be to restart the HP Deskjet 2723e.

Mac

  • Turn on the HP Deskjet 2723e and the Mac device.
  • For the Mac operating system, download the HP Easy Smart.
  • Install the HP Easy Smart to run a diagnosis of the HP Deskjet 2723e printer.
  • Complete the on-screen instructions to rectify the issues.
  • Some of the changes that will need to be made will be to restart the printer.
  • Updating the HP printer driver and updating Mac device software.
  • Following this, uninstall the driver and reinstall the HP Deskjet 2723e printer driver.
  • Reset the HP Deskjet 2723e printer to reboot the printer.
  • These steps will assist in the process of removing the issue with the HP Deskjet 2723e printer.

HP Deskjet 2723e printer is not responding

Here are the steps that are to be followed to rectify the issue that indicates the printer is not responding

  • Power up the HP Deskjet 2723e printer and the Mac or the Windows devise.
  • Check if the wireless connection is active and stable.
  • Reset the wireless router and make an attempt to connect the printer again.
  • Check if the printer is functioning properly after the change.
  • Ensure that the HP Deskjet 2723e printer is set as the default printer.
  • Check if the driver is updated for the HP Deskjet 2723e and the device should be updated.
  • Check the printer startup mode – make sure it is set to Automatic mode.
  • Complete the changes, restart the printer and continue using the printer.

HP Deskjet 2723e Driver unavailable Error

  • Begin the first step by checking the wireless connection.
  • It should be active and stable. The speed should be sufficient.
  • Reset the HP Deskjet 2723e printer. Pull out the power cord from the printer.
  • Remove the other end of the power cord from the power supply.
  • Complete the setup of the HP Deskjet 2723e.
  • Connect it again to a wireless connection.
  • Press and hold the WPS push button on the printer and the wifi router.
  • This will establish the connection.
  • Following this, check the HP Deskjet 2723e driver.
  • Update the HP Deskjet 2723e driver and the device software.
  • Restart the printer again and then connect the HP Deskjet 2723e printer.

HP Easy Start Software Installation Fails on Mac

  • Ensure that the HP Deskjet 2723e printer and device are placed close to the wifi router.
  • Ensure that there is no damage to the printer and the wifi router.
  • Restart the HP Deskjet 2723e printer to check if the issue still prevails.
  • Following this, choose the network icon on the Mac device.
  • Check if the network name is accurate and that it is active.
  • Once all the changes are made, proceed with the installation of the HP Easy Start Software.
  • The process should take place without hassle.
  • The HP Easy Start download and install will be complete.

Unsuccessful Network Installation Error in Windows

  • Turn off the HP Deskjet 2723e printer and the device.
  • Turn it back on in a few minutes and proceed with the process of removing the issue of the network installation.
  • Restart the wireless router and check if the network is active and stable.
  • Remove the connection between the HP printer and the device.
  • Establish the connection once again by opening – Add or Remove Program.
  • Choose the printer name from the list –  HP Deskjet 2723e.
  • For a Windows device, choose the Control Panel and Devices and Printers.
  • Right-click on the printer icon.
  • If the issue continues to prevail download the HP Print and Scan Doctor.

Blue Screen Error or Flashing LIghts while Connecting to Wireless Network (Windows)

  • Check if the router firmware is updated to the latest version.
  • Following this, open the Command Prompt and enter – ipconfig.
  • Locate the wireless LAN settings.
  • Turn off the HP Deskjet 2723e and the wireless connection.
  • Give it a few minutes and turn on the  HP Deskjet 2723e printer and the wireless router.
  • Make a change to the printer and choose Restore Network Default settings.

Complete the step and the issue should no longer prevail on the  HP Deskjet 2723e

Wireless Connection is lost after a router or network settings change

  • Check if the wireless connection is active.
  • Ensure that it is stable and there is no issue with the wireless router.
  • Check if the wifi router is compatible with the  HP Deskjet 2723e printer.
  • The  HP Deskjet 2723e printer and the device should be placed near the wifi router.
  • Restart the  HP Deskjet 2723e and make an attempt to connect the printer again.
  • Following this, bring the printer to the original settings.
  • Select and Restore Network Default options.
  • Connect the HP Deskjet 2723e printer connect the wireless network.
  • Choose the wireless connect and enter the wifi credentials.
  • With this, the wireless connection will be complete.
Scroll to Top