hp-envy-inspire-7958e-driver

HP Envy Inspire 7958e Setup

The HP Envy Inspire 7958e is an all-in-one printer. To begin using it you will have to complete a series of steps. Start by completing the initial setup of the printer. That would be the unboxing of the printer and keeping it in a flat and safe spot. Following this it will have to be turned on, cartridges inserted and paper loaded in the tray. To complete the steps further, read on to know how to download and install the HP printer driver for HP Envy Inspire 7958e.

Features includes:

HP Envy Inspire 7958e Setup on Mac

Follow these instructions to complete the setup and driver installation of the HP Envy Inspire 7958e driver on a Mac Device

  1. Begin the process by completing the physical setup at first. Start by unboxing the HP Envy Inspire 7958e printer.
  2. Place the printer in a safe spot near the Mac device. Power it up with the power cord.
  3. Remove all the protective material and load the cartridges.
  4. Place the paper on the paper tray.
  5. Move your attention to the Mac device and open a browser and enter the HP Support website.
  6. Follow the instructions to initiate the download and the installation of the HP Envy Inspire 7958e driver.
  7. While the installation is taking place, you will be prompted to connect to a network.
  8. Choose wireless or USB and follow the instructions.
  9. With this, the HP Envy Inspire 7958e printer is set up for a Mac device.

HP Envy Inspire 7958e Setup on Windows

Follow the steps below to complete the setup of the HP Envy Inspire 7958e printer for a Windows device

  1. Begin by removing the printer from the box and placing it on a safe flat surface.
  2. Power up the printer using the power cord.
  3. Load the cartridge and high-quality paper into the paper tray.
  4. Move over to the windows device and open the HP Support page.
  5. Key in details such as HP Envy Inspire 7958e and Windows OS.
  6. Download and install the driver on the windows device.
  7. Follow the instructions; connect to a network when prompted.
  8. Use wireless network or USB option.
  9. After the connection the complete setup of the HP Envy Inspire 7958e printer.

HP Envy Inspire 7958e wireless setup

  1. Power up the HP Envy Inspire 7958e printer to begin the wireless network setup.
  2. Note that there should be a stable and active connection.
  3. Make a note of the wifi credentials that will be needed later.
  4. Move over to the printer’s display and press the wireless option.
  5. This will lead you to a series of options to choose from.
  6. Select the wireless setup wizard and continue.
  7. From the list of networks that show up, choose the desired one and enter the details.
  8. Within a few seconds, the connection will be established.

HP Envy Inspire 7958e for Smartphone

Follow the process of connecting the HP Envy Inspire 7958e printer to a smartphone

  1. Power up the printer and note that the printer and the smart device are connected to the same wireless network.
  2. On the smartphone, download the HP Smart app.
  3. Install the HP Smart app and open it.
  4. On the app, locate a + button and tap it.
  5. A list of available printers will show up.
  6. Click on the desired printer – HP Envy Inspire 7958e.
  7. The connection will take a few seconds to complete.
  8. You can print, scan and send faxes from the HP Smart App.

HP Envy Inspire 7958e driver download on Mac

  1. After the complete physical setup is done, you will have to download a driver for the Mac device.
  2. Move over to the Mac device and open the HP Support page 123.hp.com/setup 7958e.
  3. Select Drivers and Software from the tab and choose the product – printer.
  4. Enter details of the printer – HP Envy Inspire 7958e and the operating system – Mac OS.
  5. Choose the all-in-one driver and download it.
  6. Complete the installation by following the on-screen instructions.
  7. With this, the installation of the HP driver for a Mac device is complete.

HP Envy Inspire 7958e driver download on Windows

  1. To use to HP Envy Inspire 7958e printer to its full capacity, a driver should be downloaded.
  2. On the Windows device, open the web browser and key into the HP Support website – 123.hp.com/setup 7958.
  3. Choose Drivers & Software from the tab on the home page.
  4. Follow instructions and share details such as product type – printer, printer name – HP Envy Inspire 7958e and operating system – Windows OS.
  5. A list of drivers will appear on the screen, choose the one needed and download.
  6. Complete the installation of the driver and connect the HP Envy Inspire 7958e to a network.
  7. The installation of the HP Envy Inspire 7958e driver is complete.

HP Envy Inspire 7958e Smart App download and install

  1. Power up the HP Envy Inspire 7958e printer to begin the wireless network setup.
  2. Note that there should be a stable and active connection.
  3. Make a note of the wifi credentials that will be needed later.
  4. Move over to the printer’s display and press the wireless option.
  5. This will lead you to a series of options to choose from.
  6. Select the wireless setup wizard and continue.
  7. From the list of networks that show up, choose the desired one and enter the details.
  8. Within a few seconds, the connection will be established.
Scroll to Top